High Country Valve Driver Card Setup Video Tutorial*


Take a look at this video tutorial which shows the procedure to set up the minimum and maximum values on a 4-20ma High Country Valve Driver Card on a Schwing Bioset Piston Pump Hydraulic Power Pack. After the Valve Driver Card is set up, PLC Values should correlate to the minimum and maximum speed references.

NOTE: This procedure is only to be used if you get a Valve Driver Card that has not already been set up by Schwing Bioset, Inc.

Schwing Bioset, Inc. High Country Valve Driver Card Setup Video Tutorial   

For questions on this procedure or other service questions, please contact our Service Department at (715) 247-3433.

Be sure to take a look at Schwing Bioset’s other Tech Tips and our recent News and Blog.

Important:* This content is not intended to replace the written Operation and Maintenance manual provided by Schwing Bioset, Inc. Plant personnel must review and become familiar with Schwing Bioset’s written O&M Manual provided with the equipment, and they should refer to the manual with respect to the proper operation and maintenance of this equipment. Always follow recognized industry standards and practices when operating and maintaining this equipment. In the event of any discrepancy between this presentation and the written O&M Manual provided by Schwing Bioset, always follow the instructions given in the written O&M Manual or call Schwing Bioset in Somerset, WI, at 715-247-3433.
Download Our Brochures and Application Reports


Subscribe to Start Receiving Schwing Bioset eNews