Schwing Bioset Service Seminars
In addition to our commitment to provide high-quality technical, field and parts support, Schwing Bioset also offers Service Seminars to provide additional classroom and hands-on product training. Service Seminars cover a range of topics, but all focus on product troubleshooting and maintenance training that is suitable for both new and seasoned mechanics. Students will be exposed to classroom and hands-on training with our shop equipment. Expect to get your hands dirty as we operate, perform maintenance, and troubleshoot common systems.
The Schwing Bioset Training Team is excited to begin offering our KSP Level I, KSP Level II, and Screw Press factory seminars in 2022! Registrations will open on July 12, 2021. We do also have some spaces left in our 2021 training classes.
Please note that our class sizes are limited per class (so act fast!), and we are complying with CDC guidelines to prevent the spread of COVID-19. Attached to the training registrations are our COVID-19 Policies and Expectations, which must be signed and accepted at the time you register for the training.
The safety of Schwing Bioset customers, employees, and family members continues to be a number one priority for our company. We will continue to monitor the situation with COVID-19 and provide updates if anything changes.
For questions regarding our updated policies, please contact Trisha at email@example.com.
We look forward to serving your training needs.
The Schwing Bioset Training Department
Factory Service Seminars
Factory Service Seminars are our set curriculum for the KSP Pump System and Screw Press Systems. They are typically held at our Florida Training Center in sunny Ft. Myers (we have held seminars in Canada as well). Customers will be exposed to classroom and hands-on training with our shop equipment. Curriculum is standardized and applicable for all customers that attend. Expect to get your hands dirty as we operate, perform maintenance, and troubleshoot common systems.
Refer to registration flyers for seminar dates and information. Get a discount when you register early!
Purchase four or more seats (up to six seats per class) and get a guaranteed private class at our Florida Training Center. Contact Trisha (firstname.lastname@example.org) for more information, or if you prefer, to set up a training at your facility.
If you cannot attend one of the scheduled seminars, contact Trisha and ask about our waitlist or onsite service seminar opportunities.
KSP Pump Service Seminars
KSP Level I
The Level I seminar covers Schwing Bioset’s KSP Pump systems’ equipment, operations, and maintenance, and the basics of hydraulics. This seminar benefits anyone that works with our KSP Pump systems—whether in operations and/or maintenance. Click the link below to access the registration and more details.
April 13-15, 2021, in Fort Myers – Level I (This session is now complete)
July 20-22, 2021, in Fort Myers – Level I (This session is now complete)
IMPORTANT: Prerequisite for KSP Level II Seminar
KSP Level II
The Level II seminar takes a deep-dive into Schwing Bioset’s KSP Pump System. This seminar focuses on the maintenance and troubleshooting of the KSP pump system, expands on hydraulics, and covers electrical procedures. This seminar benefits anyone that wants to learn more about troubleshooting and maintenance techniques and hydraulics. Click the link below to access the registration and more details.
May 4-6, 2021, in Fort Myers – Level II (This session is now complete)
August 17-19, 2021, in Fort Myers – Level II (Rescheduled)
August 31-September 2, 2021, in Fort Myers – Level II (This session is now full)
IMPORTANT: Attendees must have attended a KSP Level I Seminar within the past three years in order to register for this training. Registrations will be accepted only if attendees meet this criteria. Please contact Trisha (email@example.com) for questions.
Screw Press Service Seminar
The Screw Press Service Seminar covers Schwing Bioset’s Screw Press Dewatering System. Attendees will be exposed to classroom and hands-on training, covering the equipment and its components, safety, dewatering process, operations, maintenance, and troubleshooting. This seminar benefits anyone that wants to learn more about the Screw Press Dewatering system, refine their skills in operations and/or maintenance, and understand the dewatering process to optimize their operations. Click the link below to access the registration and more details.
September 21-23, 2021, in Fort Myers (This session is now full)
Onsite Service Seminars
Onsite Service Seminars are customized to your facility’s equipment and system, and it is conducted at your facility. Similar to our Factory Service Seminars, customers can expect classroom and hands-on training. The advantage of our onsite training is that we customize our curriculum to cover the ins-and-outs of your equipment and systems. Our Training Team works closely with you to identify and meet your training needs.
To receive a quote for onsite training, please contact our Aftermarket Support Team:
Aftermarket Business Development
For information or questions, please contact Trisha (firstname.lastname@example.org).
For questions, or to get on our wait list, please fill out of the form on this page or contact Trisha at email@example.com.
Para cualquier pregunta o para estar en la lista de espera, por favor llene las formas en esta página o contacte a Trisha a firstname.lastname@example.org.