News from Schwing Bioset

Schwing Bioset is Excited to Offer Pump and Screw Press Service Seminar Trainings in 2021

 

Written by Trisha Bennett

 

The Schwing Bioset Training Team is excited to again begin offering our KSP Pump Level I, KSP Pump Level II, and Screw Press factory seminars in 2021.

We have appreciated everyone’s patience and understanding, as we were not able to reschedule our factory seminars in 2020. While eager to schedule these seminars, we have been developing a plan to maximize training participants’ safety while offering an effective training experience at our Florida Training Center.

The safety of Schwing Bioset customers, employees, and family members continues to be a number one priority for our company. We will continue to monitor the situation with COVID-19 and provide updates if anything changes.

About Our Service Seminars

Factory Service Seminars are our set curriculum for the KSP Pump Systems and Screw Press Systems. They are typically held at our Florida Training Center in sunny Ft. Myers, where customers will participate in classroom and hands-on training with our shop equipment. Curriculum is standardized and applicable for all customers that attend. Expect to get your hands dirty as we operate, perform maintenance, and troubleshoot common systems.

The KSP Pump Level I seminar covers Schwing Bioset’s KSP Pump systems’ equipment, operations, maintenance, and the basics of hydraulics. This seminar benefits anyone that works with our KSP Pump systems—whether in operations and/or maintenance. 

The KSP Level II seminar takes a deep-dive into Schwing Bioset’s KSP Pump Systems. This seminar focuses on the maintenance and troubleshooting of the KSP pump system, expands on hydraulics, and covers electrical procedures. This seminar benefits anyone that wants to learn more about troubleshooting and maintenance techniques and hydraulics. 

The Screw Press Service Seminar covers Schwing Bioset’s Screw Press Dewatering Systems. Attendees will be exposed to classroom and hands-on training, covering the equipment and its components, safety, dewatering process, operations, maintenance, and troubleshooting. This seminar benefits anyone that wants to learn more about the Screw Press Dewatering system, refine their skills in operations and/or maintenance, and understand the dewatering process to optimize their operations. 

Our onsite Service Seminars are customized to your facility’s equipment and system, and it is conducted at your facility. Similar to our Factory Service Seminars, customers can expect classroom and hands-on training. The advantage of our onsite training is that we customize our curriculum to cover the ins-and-outs of your equipment and systems. Our Training Team works closely with you to identify and meet your training needs.

How To Sign Up

Refer to our Service Seminar Webpage for seminar dates, information, and registration flyers. Registration is open as of January 29th. Get a discount when you register early! Purchase four or more seats (up to six seats per class) and get a guaranteed private class at our Florida Training Center.

Please note that our class sizes are limited to 6 individuals per class (so act fast!), and we are complying with CDC guidelines to prevent the spread of COVID-19. Attached to the training registrations are our COVID-19 Policies and Expectations, which must be signed and accepted at the time you register for the training.

Please contact Trisha (tbennett@schwingbioset.com) for more information, questions, to set up a training at your facility, or to get on our waitlist.

We look forward to seeing you in 2021!

Schwing Bioset Training Service Seminars  Schwing Bioset Training Service Seminars

 

Read More Schwing Bioset  News and Blog Articles

 

 

Tags: KSP Service Seminar, Training Classes, Screw Press Service Seminar

Schwing Bioset is Offering Two KSP Pump Training Seminars in 2018

 

Posted by Kelly Kramer, January 2018

 

The Schwing Bioset Service Team is excited to announce that it will be holding two KSP Pump Training Seminars in 2018!

Both sessions will be in May at our facility in Fort Myers, Florida. Attendees will join our instructors for classroom and hands-on KSP Pump Training and learn how to properly use, maintain, and troubleshoot pump equipment. They will have the chance to learn more about basic hydraulics, poppet valves, power packs, setting pressures, screw feeders, troubleshooting, and more!

The regular cost to register is $1295, but if you register early (by February 14th) you can receive $245 off of your registration fee. Our classes do fill up, so please reserve your spot now. 

The deadline to register for the spring seminars is March 23rd. You can get more information and registration forms at the link below.

For questions or to register, please contact Ashley at ahinrichs@schwingbioset.com or (715) 247-3433. 

 Click Here for Info on our   KSP Pump Training 

 

Schwing Bioset Pump Training Seminar    

 

 IMG_4642.jpg   DSC_0044.jpg

 

Tags: Announcements, Events, KSP Service Seminar, Pumps

Another Successful Schwing Bioset KSP Pump Service Seminar is Complete

 

Written by Kelly Kramer

May 2017

Schwing Bioset, Inc. (SBI) held its Spring KSP Pump Service Seminar from May 9 – 11 in MN/WI. The seminar was our most well-attended seminar yet and, once again, led by Schwing Bioset’s Quality Control Specialist, Jack Koehler, and Service Technician, Chris Kohnen. The seminar and training is designed for Schwing Bioset customers to expand their knowledge on how to properly use and maintain their equipment, to help ensure they get the most out of it. This spring, there were 23 customer attendees and three of Schwing Bioset’s employees who attended. The course provides 24 hours of training credits toward quality training and education for the attendee.

The first two days of training were held in the classroom and covered safety, operations, maintenance, and basic hydraulics. The third day was factory training, which provided hands-on experience where attendees train with the SBI Parts/Service and Quality Control departments, working directly with equipment to learn about its use, maintenance, and using it safely. Some of the topics discussed include hydraulics, poppet valves, power packs, schematic reading, troubleshooting, screw feeders, sludge pumps, preventative maintenance, and much more.

 

 DSC_0025.jpg  Schwing Bioset Pump Training

 

Some feedback we received from the seminar attendees include:

“Very informative and all subjects were covered well. All around fun and above what was expected.”

 “I am impressed. Schwing employees were over the top helpful and accommodating. I would find it difficult to improve the experience.”

 “The training, evening events, and professionalism of the Schwing Bioset staff was excellent!!”

“The entire seminar was great. Very knowledgeable instructors.”

“The Schwing Bioset instructors and tech’s combine the training with enjoyment. I liked all of it.”

“Great class. Great instructors. Awesome. Everything.”

“Great seminar. Jack and Chris do an awesome job and show dedication to their trade.”

“Everything was great. An awesome time.”

 

Schwing Bioset Pump Training  Schwing Bioset Pump Training

 

Schwing Bioset offers KSP Pump Service Seminars throughout the year. The next training will take place in Toronto in October 2017. Training fills up fast, so please register right away if you are interested in attending. For general inquiries or if you are interested in our Spring 2018 session in MN/WI, please email Kelly with questions or to get on the wait list.

Our Service Department is also available to come to your location and train at your facilities. If that is an option you’re interested in, please contact our Service Manager, Paul Katka, at (715) 350-6913.

 

Read More Schwing Bioset  News and Blog Articles

 

Tags: Events, KSP Service Seminar, Pumps

Schwing Bioset, Inc. Onsite University Gives Students Pump Knowledge

 

Written by Dan Anderson

With our legendary spring pump school right around the corner, our Service department wants to let everyone know that our school can also come to you!

Having an onsite pump training can be a great tool to help expand your staff’s knowledge of the equipment in your wastewater treatment plant or at your mine. Plus, training credits are offered.

With one of our Service Technicians as the instructor, we offer customized programs tailored to the specific equipment at your plant. Attendees will have the opportunity for hands on demonstrations and instruction, in addition to learning about pump hydraulics, poppets, rams, safety, and more.

Schwing Bioset Pump Training

Here are a few quotes from previous service school attendees:

“I would recommend anyone involved with Schwing Bioset products to take this seminar. They have super customer service and an invaluable learning tool in these seminars.”

“Very worthwhile. Would recommend to any technicians who works on Schwing Bioset pumps. I am grateful for the privilege to attend.”

“The instructors were excellent. I learned a lot and had fun doing it.”

Whether it’s at your plant or at our location, we look forward to educating you and your operators soon.

To learn more about our onsite trainings, please contact Paul Katka at pkatka@schwingbioset.com or 715.247.3433.

Schwing Bioset Onsite Pump Training

 

Read More Schwing Bioset  News and Blog Articles

 

Tags: Announcements, KSP Service Seminar, Pumps

Schwing Bioset Offering Two KSP Pump Training Seminars in 2017

 

Posted by Kelly Kramer, February 13, 2017 

 

The Schwing Bioset Service Team is excited to announce that we will be holding two KSP Pump Training Seminars in 2017!

Our first will be this spring from May 9-11 in Stillwater, MN and at our facility in Somerset, WI. Here attendees will join us for classroom and hands-on KSP Pump Training and learn how to properly use, maintain, and troubleshoot pump equipment. The deadline to register for the spring seminar is April 3rd.

We will also be having a seminar this fall in Toronto from October 17-19. Join us for classroom learning and hands-on demonstrations to gain an understanding of equipment, use, and safety. The deadline to register for the fall Toronto training is July 14th.  

Attendees will have the chance to learn more about basic hydraulics, poppet valves, power packs, setting pressures, screw feeders, troubleshooting, and more!

The regular cost to register is $1195, but if you register early you can receive $100 off of your registration fee. Our classes do fill up, so please reserve your spot now.  Click Here for Info on our   KSP Pump Training 

2017 Training Promo Both Dates.jpg

 

20151022_110017.jpg    20160512_095648.jpg

 

Tags: Announcements, Events, KSP Service Seminar, Pumps

Schwing Bioset Wraps Up 2016 Spring KSP Pump Service Seminar

 

May 17, 2016

Schwing Bioset KSP Pump Training Schwing Bioset KSP Pump Training

The first two days of training are held in the classroom and cover safety, operations, maintenance, and basic hydraulics.  The third day of training provides hands-on experience where attendees train with the SBI Parts and Service, Quality Control, and Customer Service departments working directly with equipment to learn about its use, maintenance, and using it safely.  Some of the topics discussed include hydraulics, poppet valves, power packs, schematic reading, troubleshooting, screw feeders, sludge pumps, preventative maintenance, and much more.

Schwing Bioset typically offers two KSP Pump Service Seminars per year.  The next training will take place in the fall of 2016.  Training fills up fast, so please consider registering ahead of time if you are interested in attending.

Our Service Department is also available to come to your location and train at your facilities. If that is something you’re interested in, we would be happy to provide you with a quote.  Please contact Paul Katka, the SBI Service Manager, at (715) 350-6913, if you would like more information for this option.

Some feedback we received from the seminar attendees include:

"Very accomidating to everyone's needs and opinions. All Schwing Bioset employees I met at both the seminar and plant were more than decent. Keep doing what you do, wouldn't change a thing."

"Everything was very professional and well rounded."

"I liked this program. I had a good chance to understand the hydraulic system and troubleshooting. The hands on portion in the shop was also impressive. It was a very good experience!"

"The seminar was very informational. The hands on portion was very good. I learned a lot and learned how to troubleshoot on the powerpack and pump. Very successful class."

"Very satisfied with the training, the people involved and the material. Thanks for all the care and the exceptional training."

For questions about this training or to inquire about a future training at Schwing Bioset, please contact Tanya at: tweinzierl@schwingbioset.com or marketing@schwingbioset.com

 

 Read More Schwing Bioset  News and Blog Articles

 

Schwing Bioset, Inc. (SBI) held its Spring KSP Pump Service Seminar from May 10 to May 12.  The seminar was once again led by Schwing Bioset’s Quality Control Specialist, Jack Koehler.  The seminar and training is designed for Schwing Bioset customers to learn how to properly use and maintain their equipment, to help ensure they get the most out of it.  This spring, there were nine customer attendees and six of Schwing Bioset’s employees who attended.  The course builds 24 hours toward quality training and education for the attendee.

Tags: Events, KSP Service Seminar, Pumps, Equipment Maintenance

Schwing Bioset Holds First Spanish KSP Pump Service Seminar

 

October 20, 2015

Schwing Bioset, Inc. (SBI) is currently holding its Fall KSP Pump Service Seminar. For the first time, the seminar is being held for Spanish speaking attendees. The seminar is being led by Schwing Bioset’s Quality Control Specialists, Jack Koehler and Jimmy Esquivel. The seminar and training is designed for Spanish speaking Schwing Bioset mining pump customers to learn how to properly use and maintain their equipment, to help ensure they get the most out of it.  The course builds 24 hours toward quality training and education for the attendee. 

The first two days of training are held in the classroom and cover safety, operations, maintenance, and basic hydraulics.  The third day of training provides hands-on experience where attendees train with the SBI Parts and Service, Quality Control, and Customer Service departments working directly with equipment to learn about its use, maintenance, and using it safely.  Some of the topics discussed include hydraulics, poppet valves, power packs, schematic reading, troubleshooting, screw feeders, sludge pumps, preventative maintenance, and much more. 

Schwing Bioset offers two KSP Pump Service Seminars per year and plans to hold more Spanish courses in the future.  The next KSP Seminar will take place in the spring of 2016. If you’re interested in learning more about the training, visit our website here.

If you would like us to come to you and train at your facilities, we would be happy to provide you with a quote.  Please contact the SBI Service Manager, Paul Katka, if you are interested in this option. 

For questions about this training or to inquire about a future training at Schwing Bioset, please email Tanya.

 

  Schwing Bioset Spanish KSP Pump Service Seminar 

 

 

Tags: Events, KSP Service Seminar, Mining Pumps, Equipment Maintenance

Schwing Bioset Wraps Up 2015 Spring KSP Pump Service Seminar

 

May 14, 2015

Schwing Bioset, Inc. (SBI) held its Spring KSP Pump Service Seminar from May 12 to May 14.  The seminar was once again led by Schwing Bioset’s Quality Control Specialist, Jack Koehler.  The seminar and training is designed for Schwing Bioset customers to learn how to properly use and maintain their equipment, to help ensure they get the most out of it.  This spring, there were 16 attendees from all over the U.S. that attended.  The course builds 24 hours toward quality training and education for the attendee. 

The first two days of training are held in the classroom and cover safety, operations, maintenance and basic hydraulics.  The third day of training provides hands-on experience where attendees train with the SBI Parts and Service, Quality Control, and Customer Service departments working directly with equipment to learn about its use, maintenance, and using it safely.  Some of the topics discussed include hydraulics, poppet valves, power packs, schematic reading, troubleshooting, screw feeders, sludge pumps, preventative maintenance, and much more. 

Schwing Bioset offers two KSP Pump Service Seminars per year.  The next training will take place this coming fall from October 6 – 8, 2015.  Training fills up fast, so please consider registering ahead of time.

If you would like us to come to you and train at your facilities, we would be happy to provide you with a quote.  Please contact Paul Katka, the SBI Service Manager, at (715) 350-6913, if you are interested in this option. 

For questions about this training or to inquire about a future training at Schwing Bioset, please contact Tanya at: tweinzierl@schwingbioset.com or marketing@schwingbioset.com.

 

Training_2015_4 Training_2015_5-cropped  

 20150514_132638_resized

 20150514_132040_resized-cropped  

Tags: Events, KSP Service Seminar, Pumps, Equipment Maintenance

Schwing Bioset 2012 KSP Service Seminar

May 2012

KSP 2012 Service Seminar

Schwing Bioset is proud to announce the dates for our KSP Service Seminar. The seminar will be held on May 7th-11th, 2012. A second class maybe offered on May 14th-18th, depending upon demand.

Get the most out of your equipment. Attend the Schwing Bioset Service Seminar and receive the best training in the industry. With both classroom and hands-on instruction you will learn how to properly use and maintain your equipment. The classroom portion of the seminar is held in our training center with working models and cut-a ways of components. Our hands-on facility features several pieces of working equipment students can interact with.

The cost for the seminar is $1195.00 USD. The fees do not include airfare, ground transportation to or from the airport, lodging or evening meals. Payment must be received prior to enrollment.

Click to download the registration form!

 

KSP Service Seminar

Tags: Sludge Pumps, Class 'A' Materials, KSP Service Seminar, Poppet Valves, Screw Feeders, Hydraulic Pumps

Schwing Bioset 2010 KSP Service Seminar

April 2009

KSP 2010 Service Seminar

Schwing Bioset is proud to announce the dates for our KSP Service Seminar. The seminar will be held on April 19th - 23rd, 2010 in Somerset, WI. A second class maybe offered on April 26th - 30th, depending upon demand.

Get the most out of your equipment. Attend the Schwing Bioset Service Seminar and receive the best training in the industry. With both classroom and hands-on instruction you will learn how to properly use and maintain your equipment. The classroom portion of the seminar is held in our training center with working models and cut-a ways of components. Our hands-on facility features several pieces of working equipment students can interact with.

The cost for the seminar is $1195.00 USD. The fees do not include airfare, ground transportation to or from the airport, lodging or evening meals. Payment must be received prior to enrollment.

Sign-up Form

KSP Service Seminar

Tags: KSP Service Seminar, Schwing Bioset